IPS e.max CAD MT
IPS e.max CAD MT blocks are suitable for the CAD/CAM technique. They consist of the tried-and-tested lithium disilicate glass ceramic material, which features a flexural strength of 530 MPa*.
The new blocks of medium translucency range between the LT and HT blocks. The MT blocks are intended for restorations which require a higher level of translucency than LT restorations and a higher brightness level than HT restorations. Furthermore, the MT blocks are ideally suitable for fabricating restorations with the staining and cut-back technique.
Due to their medium translucency, the MT blocks are recommended for the following restorations:
- thin veneers, veneers
- partial crowns
The IPS e.max CAD MT blocks are available in size C14. The shades B1, BL4 and BL3 replace the IPS e.max CAD Value blocks in the shades V1, V2 and V3. Additionally, IPS e.max CAD MT is available in the shades BL2, A1, A2 and A3. The IPS e.max CAD Impulse Opal blocks remain unchanged.
- Imitation of less translucent tooth areas
- Optimal integration into the natural dentition
- Proven, high-strength material for clinical long-term success and flexibility during cementation
*Average biaxial flexural strength, over a period of 10 years, R&D Ivoclar Vivadent, Schaan, Liechtenstein