IPS e.max Press
IPS e.max Press are lithium disilicate glass-ceramic ingots for
the press technique.
The innovative IPS e.max Press lithium disilicate glass-ceramic (LS22) offers excellent fit, form and function combined with high strength of 400 MPa. The material is supplied in four levels of translucency and two sizes. The resulting restorations exhibit lifelike esthetics, independent of the shade of the preparations.
IPS e.max Press is used to produce single-tooth restorations, bridges for the anterior and premolar region and implant superstructures. Minimally invasive inlays and onlays (1 mm) and thin veneers (0.3 mm) round out the indication range.
The two investment materials IPS PressVEST and IPS PressVEST Speed are available for processing IPS e.max Press.
A wide selection of ingots is offered from which users can choose the one that suits their preferred processing technique (staining, cut-back or layering technique) and the case at hand (e.g. discoloured preparation). The restorations are characterized or veneered with matching staining materials or layering ceramic from the IPS e.max Ceram assortment. The press material for the fabrication of full-contour restorations is available in 16 A-D and four Bleach BL shades. The materials for the layering technique are supplied in group shades.
The innovative Multi ingots are available in selected Bleach BL and A–D shades. The material demonstrates a lifelike shade progression from the dentin to the incisal areas and therefore imparts monolithic restorations with a highly esthetic appearance. With these ingots, veneers and anterior, posterior and hybrid abutment crowns are fabricated quickly and efficiently. Ideally, these restorations only need to be glazed. If desired, however, they can be modified using the staining or cut-back technique.
The high translucency ingots (HT) are suitable for the fabrication of minimally invasive full-contour restorations, such as inlays, onlays and veneers. The restorations are characterized with staining materials.
The MT ingots are provided in the following shades: A1, A2, A3, B1, BL2, BL3 and BL4. These medium-translucency ingots are used in cases where a brighter material than HT and a more translucent material than LT is needed. Restorations made of the MT ingots are ideal for the staining and cut-back techniques.
Full-contour partial crowns and crowns are fabricated with the low translucency ingots (LT). In the anterior region in particular, the
esthetic appearance of the restorations is maximized by employing the cut-back technique.
The medium opacity ingots (MO) are used to fabricate substructures for vital or slightly discolored teeth. They create an ideal basis
for lifelike restorations completed with the layering technique.
In cases where the prepared tooth structure is discolored or titanium abutments are used, the HO ingots mask the dark background to achieve highly esthetic results.
The Impulse ingots are available in two different levels of brightness (Opal 1, Opal 2). The restorations produced with these ingots have exceptionally opalescent properties. Therefore, this material is ideal for producing (thin) veneers for light teeth, which require an opalescent effect.